Automatic glass jar container with lid servo piston bottle filling
machine for syrup and honey
Huituo SFL filling machine is mainly composed of control system,
conveying device, photoelectric detection, feeding device, storage
tank, liquid level control device, filling device, diving device,
bottle holding device, bottle blocking device, etc.
Huituo linear liquid filling machine
1. Suitable for different bottles
2. Suitable for different filling materials
3. CIP
4. Tool-free changeover
5. High filling accuracy
6. Siemens control system
Storage tank
The storage tank is composed of two spray balls to achieve no
dead-angle cleaning. The liquid level uses an ultrasonic liquid
level sensor for continuous monitoring, and a pneumatic drain valve
is used for tailing emptying, and cleaning water draining.
Filling nozzle
Specially designed filling nozzle with high precision and long
service life.
CIP
The filling cleaning head is located on the back side of the
conveyor and the front side of the servo stopper. When performing
CIP, remove the leaking liquid container under the filling nozzle
first. The leaking liquid container is fixed with a quick release
pin, which can be removed by removing the quick release pin. After
removing the leaking liquid container, adjust the filling head to
move the adjusting handle, and adjust the filling nozzle to the
cleaning port position.
Changeover
The change-over adjustment parts include guardrail, filling nozzle
spacing adjustment, bottle-in photoelectric adjustment, stop
position adjustment, etc. Please check the changeover video for the
specific adjustment positions.
Common troubleshooting
Here are examples of commonly occurring faults and troubleshooting
methods.
1) Inaccurate bottle-in count
Check the sensor position, whether it is adjusted to the position
according to the changeover video.
2) Inaccurate filling accuracy
Check the parameter settings, such as whether the filling volume
setting is correct, filling valve opening delay (1000ms), valve
closing delay (800ms)
3) Unstable filling volume of single head
Check whether there is any problem with the setting parameters, if
there is no problem, check whether the electric cylinder
synchronous wheel set is loose.
