Fully automatic bottle flow meter filling machine for liquid
laundry detergent
Flow meter filling machine
Our SF series flowmeter filling machine is suitable for filling
materials with different viscosity. It has been widely used in
chemical, food, medicine, and many other industries, featuring
stable and reliable performance, high filling accuracy, convenient
adjustment and so on.
FEATURES AT A GLANCE
PRODUCT SPECIFICATIONS
No | Item | Data |
1 | Dimension | 2000mm*1600mm*2600mm, customized |
2 | Stand-alone pass rate | 99% |
3 | Filling method | Volumetric piston;
Flow meter ( KROHNE/E+H);
Self-flow gravity |
4 | Speed | 20-300bpm Customized based on requirement |
5 | Voltage | 220VAC~380VAC, 50Hz-60Hz |
6 | Air source | 0.4-0.6Mpa clean and stable air source |
7 | Noise | ≦80 decibels |
8 | Material | Frame: carbon steel, stainless steel frame; Contact with material: 316L stainless steel; Filling head: 316L stainless steel; Material pipe: sanitary grade steel hose; Connected and fixed mechanical parts: SUS304 stainless steel; Control valve: 316L stainless steel;
Screen door: stainless steel edging, plexiglass |
9 | Electrical components | PLC:Siemens
Touch screen: Siemens
Servo: Siemens
Breaker: Siemens
Sensor: IFM/LEUZE
Button: Schmeral
Conveyor motor: SEW (Optional) |
Highlights
1. Wide application, suitable for different containers and liquids.
2. Filling range from 100ml to 5,000mland even more.
3. Bottle feeding: one row, two-row or three-row available, based
on the capacity requirements.
4. Electromagnetic and mass flow meteravailable
5. Flowmeter brand: KROHNE and E+H
6. Filling accuracy 0.3%
7. Quick and easy changeover, automatic changeover is optional
8. Storage tank designed in GMP grade
9. Liquid contact parts meet the "FADCRF21" standard
10. (Pressurized) CIP and SIP available, cleaning time 5-10min
GMP storage tank
The tank contains the body, feeding pipe, cleaning pipe, cleaning
ball, the liquid level detection sensor, and the mechanical safety
valve etc. The liquid level sensor uses a guided wave radar and has
a continuous liquid level detection function to fill at low level
and stop at high level.
316L filling nozzle
Specially designed filling nozzle with high precision and long
service life and can be dived into bottle bottom to fill. The servo
motor drives the submerged filling mode of the filling head, which
can switch the dive position according to different recipes, and
the operation is more stable.
Bottle mouth fixing part
The bottle stopper uses a sliding stopper, which can be
continuously adjusted for different bottle types. The slider uses a
card slot structure, which is not easy to fall off on
the slide conveyor. All fastening handles use quick-install
handles, with no tools when adjusting.
Feeding hose
It adopts Italian imported brand conveying pipe, which conforms to
food grade, smooth EPDM rubber, abrasion resistance, ozone
resistance and aging resistance, and is
sterilized at 110 degrees for 30 minutes.
Suitable products
Advantages of electromagnetic flowmeter:
1. The measurement accuracy is not affected by changes in fluid
density, viscosity, temperature, pressure and conductivity. The
sensor induced voltage signal has a linear relationship with the
average flow velocity, so the measurement accuracy is high.
2. The range of the electromagnetic flowmeter is wide (maximum flow
/ minimum flow).
3. In addition to measuring the volume flow of general conductive
liquids, electromagnetic flowmeters can also be used to measure
strong corrosive liquids such as strong acids and alkalis, mud,
pulp and pulp;
4. Two-way measurement system, which can measure forward flow and
reverse flow.
5. Electromagnetic flowmeter has reliable performance, high
precision, low power consumption, stable zero point and convenient
parameter setting. Click on the Chinese display LCD to display
cumulative flow, instantaneous flow, flow rate, flow percentage,
and more.
Contact parts
Tank: FRP(glass fiber reinforced plastics)
Distributor: PVC
Filling nozzle: Plastic-based/254 steel
Outer frame: Stainless steel sprayed with Teflon
Main transmission parts: plastic PP
Conveyor: Plastic
Electric box material: carbon steel (plastic sprayed on the outer
surface)
Feed pipe, pipe joint: plastic (PVDF)
Level detection: PTFE probe
Seals: PTFE (long service life), fluoro rubber (average service
life) are defined as regular replacement of wearing parts
Why Huituo?
Professional in fluid control, pressure control and CIP
1. Accurately control the flow, with the standard program specially
developed for flow meter control, combined with the customized PLC
module;
2. Easily meet the multi-speed control of the flowmeter, with the
standard program specially developed for the flowmeter valve and
filling nozzle cylinder;
3. Accurately control the tank pressure to ensure the filling
accuracy, with the tank pressure control standard program specially
developed for flow meters, whether it is from a digital valve or a
PID valve;
Further ensures the filling accuracy, with the tank liquid level
control standard program specially developed for flow meters, which
can be adapted to feed pumps in the market. Featuring adaptive
feeding speed based on the liquid level, the tank level is always
in a small range of controllable fluctuations, which greatly
reduces the impact on the pressure of the tank.
